Mild steel, often abbreviated as MS, remains the backbone of the Indian construction industry. Its versatility, weldability, and cost-effectiveness make it the material of choice for structural frames, reinforcement, pipelines, and a host of other applications. As the demand for residential, commercial, and infrastructure projects surges across the country, understanding the mild steel price per kg becomes crucial for contractors, engineers, and procurement managers. This article provides an in-depth look at the current mild steel rate today, showcases city-wise price variations, compares MS steel with TMT steel, examines the factors driving price fluctuations, and offers practical guidance on where to purchase mild steel at the best rates.
Mild steel is a low-carbon steel that typically contains 0.05-0.25% carbon, along with small amounts of manganese, silicon, and trace elements. Its low carbon content gives it excellent ductility and formability while maintaining sufficient strength for most construction purposes. The Indian standard IS 2062 classifies mild steel into several grades (A, B, C, D), each tailored for specific structural requirements.
The MS steel price in 2026 reflects a balance between raw material costs, demand from the construction sector, and global steel market dynamics. As of August 2026, the average mild steel price per kg across major Indian metros ranges from Rs. 70 to Rs. 92, depending on the product shape and grade.
Below is a snapshot of the prevailing rates for common MS products:
| Product Type | Price Range (Rs. per kg) | Typical Applications |
|---|---|---|
| MS Plate (10 mm - 25 mm) | Rs. 65 - Rs. 85 | Flooring, tank fabrication, structural plates |
| MS Angle (L-100 mm - L-200 mm) | Rs. 70 - Rs. 90 | Support brackets, frames, staircases |
| MS Channel (U-100 mm - U-200 mm) | Rs. 72 - Rs. 92 | Beams, lintels, framework for doors |
| MS Round Bar (Ã 12 mm - Ã 40 mm) | Rs. 68 - Rs. 88 | Machined components, shafts, reinforcement |
These figures represent the mild steel rate today in the wholesale market. Retail prices may be marginally higher due to handling and delivery charges.
Price variations across Indian cities are influenced by proximity to steel plants, transportation costs, and local demand. The table below provides a city-wise breakdown of the average mild steel price per kg for the four most commonly sourced MS products.
| City | MS Plate (Rs./kg) | MS Angle (Rs./kg) | MS Channel (Rs./kg) | MS Round (Rs./kg) |
|---|---|---|---|---|
| Delhi/NCR | Rs. 78 | Rs. 82 | Rs. 84 | Rs. 80 |
| Mumbai | Rs. 80 | Rs. 84 | Rs. 86 | Rs. 82 |
| Kolkata | Rs. 76 | Rs. 80 | Rs. 82 | Rs. 78 |
| Chennai | Rs. 77 | Rs. 81 | Rs. 83 | Rs. 79 |
| Bengaluru | Rs. 79 | Rs. 83 | Rs. 85 | Rs. 81 |
| Hyderabad | Rs. 78 | Rs. 82 | Rs. 84 | Rs. 80 |
| Ahmedabad | Rs. 75 | Rs. 79 | Rs. 81 | Rs. 77 |
These city-wise figures give contractors a clear picture of where to source MS at the most competitive rates. For a broader view of steel prices across the country, see our detailed analysis in Steel Price Per Kg in India 2026.
While mild steel is the go-to material for many construction tasks, Thermo-Mechanically Treated (TMT) steel has gained popularity for reinforced concrete structures due to its higher tensile strength and ductility. Understanding the differences helps engineers select the right steel grade for specific project requirements.
| Steel Type | Typical Price (Rs./kg) | Key Advantages | Common Uses |
|---|---|---|---|
| Mild Steel (MS) | Rs. 70 - Rs. 92 | Easy to weld, form, and cut; lower cost. | Frames, brackets, non-structural components. |
| TMT Steel (Fe 500/Fe 550) | Rs. 85 - Rs. 115 | Higher strength, better seismic performance. | Reinforcement bars (rebars), high-rise structures. |
Although TMT steel commands a premium, its superior structural performance can reduce the overall quantity of steel required, potentially offsetting the higher unit price in large-scale projects.
The mild steel price list is not static; several macro- and micro-economic variables influence it. Below are the primary drivers:
Keeping an eye on these variables helps buyers anticipate price movements and plan procurement strategically.
Indian Standard
Indian Standard IS 2062 specifies the requirements for mild steel of various grades. Understanding these grades is essential for selecting the right material for your project. The standard defines four primary grades based on tensile strength and chemical composition:
| Grade | Min. Tensile Strength (MPa) | Min. Yield Strength (MPa) | Max. Elongation (%) | Common Uses |
|---|---|---|---|---|
| IS 2062 Grade A | 360 | 230 | 20 | General structural work, light fabrication |
| IS 2062 Grade B | 410 | 250 | 20 | Building frames, bridges, general engineering |
| IS 2062 Grade C | 450 | 300 | 17 | Heavy structural work, pressure vessels |
| IS 2062 Grade D | 450 | 300 | 15 | Welded structures, boiler plates |
For most construction applications in India, Grade B is the most commonly procured variant. It offers an optimal balance between strength, ductility, and cost, making it suitable for everything from residential building frames to commercial warehouse structures. Grade C and D are typically reserved for specialized applications requiring higher strength or improved weldability.
Before purchasing mild steel, it is important to know how to calculate the weight of different MS products. The weight determines the total cost, and knowing the formulas helps you estimate material requirements accurately for your project.
The weight of an MS plate can be calculated using the formula: Weight (kg) = Length (mm) x Width (mm) x Thickness (mm) x 0.00000785. For example, a 10 mm thick, 1200 mm wide, and 2400 mm long MS plate weighs approximately 22.85 kg. At Rs. 75 per kg, this plate would cost roughly Rs. 1,714.
For equal angles: Weight (kg/m) = (Side1 + Side2 - Thickness) x Thickness x 0.00785. A 50x50x5 mm MS angle weighs approximately 3.78 kg per meter. At Rs. 80 per kg, each meter costs about Rs. 302.
For round bars: Weight (kg/m) = (Diameter x Diameter x 0.00617). A 20 mm diameter MS round bar weighs approximately 2.47 kg per meter. At Rs. 75 per kg, each meter costs about Rs. 185.
MS channel weight varies by section size. A standard 100x50x5 mm MS channel weighs approximately 10.4 kg per meter. At Rs. 82 per kg, each meter costs roughly Rs. 853. For a detailed understanding of steel weight calculations, refer to our guide on Steel Price Per Kg in India 2026.
Finding the best deal on mild steel requires comparing multiple sources. Here are the most effective channels for purchasing MS steel in India:
Buying from authorized distributors of major steel brands like Tata Steel, JSW Steel, SAIL, and Rungta Steel ensures genuine products with proper certification. These distributors typically offer competitive pricing for bulk orders above 5 tonnes.
Platforms like Comaron, SteelSathi, and AgniSteels connect buyers directly with mills and distributors, cutting out middlemen. These platforms often provide real-time pricing, delivery tracking, and the option to compare quotes from multiple suppliers.
Every major Indian city has a dedicated steel market. For instance, Delhi's Okhla Industrial Area, Mumbai's Andheri Steel Market, and Chennai's Ambattur Industrial Estate are known for competitive MS steel pricing. Visiting these markets in person allows you to inspect material quality before purchasing.
For very large orders (50+ tonnes), purchasing directly from steel mills like SAIL, Tata Steel, or JSW Steel can save 5-10% compared to distributor prices. However, mills typically have minimum order quantities and longer delivery timelines.
Understanding historical price trends helps buyers make informed procurement decisions. Here is a brief overview of how mild steel prices have evolved in India over the past three years:
| Year | Avg. MS Plate Price (Rs./kg) | Avg. MS Angle Price (Rs./kg) | Key Market Events |
|---|---|---|---|
| 2024 | Rs. 55 - Rs. 72 | Rs. 58 - Rs. 78 | Post-pandemic recovery, rising iron ore prices |
| 2025 | Rs. 60 - Rs. 78 | Rs. 65 - Rs. 85 | Infrastructure push, increased domestic demand |
| 2026 | Rs. 65 - Rs. 85 | Rs. 70 - Rs. 90 | Stable demand, moderate inflation, new capacity additions |
The overall trend shows a gradual upward trajectory of approximately 8-12% per year, driven by rising raw material costs and sustained infrastructure development across India. For the latest iron rates and broader steel market updates, check our Iron Rate Today in India 2026 article.
As of 2026, the mild steel price per kg in India ranges from Rs. 65 to Rs. 92, depending on the product type (plate, angle, channel, round bar) and the city. MS plates are generally the cheapest at Rs. 65-85 per kg, while MS channels are slightly higher at Rs. 72-92 per kg.
Yes, mild steel is generally 15-25% cheaper than TMT steel per kg. MS steel costs Rs. 70-92 per kg, while TMT steel (Fe 500/Fe 550) costs Rs. 85-115 per kg. However, TMT steel offers higher tensile strength and is preferred for reinforced concrete structures.
IS 2062 Grade B is the most widely used grade for general construction purposes. It offers a minimum yield strength of 250 MPa and good weldability, making it suitable for building frames, columns, beams, and trusses. For heavy-duty applications, Grade C or D may be preferred.
One tonne (1,000 kg) of mild steel costs approximately Rs. 70,000 to Rs. 92,000 in 2026, depending on the product type and location. MS plates are typically at the lower end (Rs. 65,000-85,000 per tonne), while MS channels are at the higher end (Rs. 72,000-92,000 per tonne).
The main factors affecting mild steel prices include raw material costs (iron ore, coal, scrap), global steel demand and supply, domestic production capacity utilization, import duties and GST, logistics and transportation costs, seasonal construction demand, and government regulatory policies on emissions and environmental compliance.
You can purchase mild steel online through platforms like Comaron, which connects you directly with verified steel suppliers and distributors across India. Online platforms offer the advantage of real-time pricing, comparison shopping, doorstep delivery, and digital payment options. For smaller quantities, local steel markets and authorized distributors remain viable options.
Mild steel continues to be an indispensable material in Indian construction, offering the perfect balance of strength, workability, and affordability. Whether you are building a residential home, a commercial complex, or an industrial facility, understanding the mild steel price per kg and knowing where to source quality MS products can save you significant time and money. By comparing prices across cities, choosing the right IS grade, and timing your purchases strategically, you can optimize your material procurement budget. Stay updated with the latest rates and market trends by visiting Steel Price Per Kg in India 2026 for comprehensive steel pricing information.
Lot of Material Required to build Super structure. Comaron Gurgaon provides you all the product related to Super structure for any construction.
Details
